ISI Mark for Steel and Iron Products Manufacturer

The kind and location of your firm determine whether you need a steel and iron product license. Important procedures include registering your company, getting the relevant industrial and trade permits, and adhering to environmental and safety requirements. If you manufacture, you may require an industrial license and pollution control clearance. Import/export requires registration with customs officials. Tax registration, such as VAT/GST, is required. Quality certifications such as ISO or conformity with industry standards may be required. The application procedure entails completing documents, paying fees, and undergoing inspections. Requirements differ by nation, therefore consulting with local regulatory organizations is recommended.

Applicable of Indian Standard For ISI Mark for Steel and Iron Products Manufacturer

SNO PRODUCT IS NO
1 Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire 1785 (Part 1) : 1983
2 Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire 1785 (Part 2) : 1983
3 Indented wire for Pre-stressed concrete 6003:2010
4 Uncoated stress relieved strand for Pre-stressed concrete 6006:2014
5 Fusion bonded epoxy coated reinforcing bars 13620 : 1993
6 Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete 14268:1995
7 Galvanized steel sheets ( plain and corrugated) 277:2003
8 Steel plates for pressure vessels for intermediate and high temperature service including boilers 2002:2009
9 Steel plates for pressure vessels used at moderate and low temperature 2041:2009
10 Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose 2830:2012
11 High strength deformed steel bars and wires for concrete reinforcement 1786:2008
12 Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO) 648:2006
13 Grain oriented electrical steel sheet & strip (CRGO) 3024:2015
14 Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification 15391:2003
15 Hot rolled medium and high tensile structural steel 2062:2011
16 Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars 432 : Part 1:1982
17 Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire 432 : Part 2:1982
18 Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose 513 (Part-1): 2016
19 Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel 513(Part-2):2016
20 Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification 1079: 2017
21 Carbon steel billets, blooms, slabs and bars for forgings 1875:1992
22 Mild steel for metal arc welding electrodes 2879:1998
23 Steel Chequered Plates 3502:2009
24 Cold Rolled Steel Strips (Box Strappings) 5872:1990
25 Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification 5986: 2017
26 Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders 6240:2008
27 Hot Rolled bars for production of bright bars and machined parts for engineering applications 7283:1992
28 Mild steel wire rods for general engineering purposes 7887:1992
29 Hot Rolled Steel Strip for Welded Tubes and Pipes 10748:2004
30 Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — Specification 11513:2017
31 Hot rolled steel narrow width strip for welded tubes and pipes 15647:2006
32 High carbon steel wire rods- Specification 7904:2017
33 Continuously pre-painted galvanized steel sheets and coils 14246:2013
34 Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain) 15965:2012
35 Mild steel wire for General Engineering purposes 280: 2006
36 Round Steel wire for ropes 1835:1976
37 Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables 3975:1999
38 Alloy Steel billets, blooms and slabs for forging for general engineering purposes 4368:1967
39 Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire 4454 (Part 1) : 2001
40 Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire 4454 (Part 2): 2001
41 Bead Wires for Tyres 4824:2006
42 Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels 11169 (Part 1): 1984
43 Structural Weather resistant steel 11587:1986
44 Fire resistant Steel- Specification 15103: 2002
45 High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder 15914:2011
46 Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain) 15961:2012
47 Structural Steel for Building for Structures with improved seismic Resistance 15962:2012
48 Stainless Steel wire Rod 6527:1995
49 Stainless Steel Bars and Flats 6603:2001
50 Stainless Steel sheets and strips for utensils- Specification 5522:2014
51 Stainless Steel Plate, Sheet and Strip- Specification 6911:2017
52 Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification 15997:2012
53 Ferrosilicon – Specification 1110 : 1990
54 Specification for Ferronickel 4409 : 1973
55 Specification for Hot rolled steel strip (bailing) 1029 : 1970
56 Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate 2385 : 1977
57 Specification for Structural steel for construction of hulls of ships 3039 : 1988
58 Bright steel bars – v Specification 9550 2001
59 Tool and die steels – Specification 3748 : 1990
60 Steel for hardening and tempering – Specification 5517 : 1993
61 Galvanized Structural Steel – Specification 16732: 2019
62 Specification for Steel for valves for internal combustion engines 7494 : 1981
63 Specification for Carbon manganese steel forgings for pressure vessels 12146 : 1987
64 Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state 16585 : 2016
65 Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification 2831 : 2012
66 Steel Rivet Bars (medium And High Tensile) – For Structural Purposes 1148: 2009
67 Specification for Mild Steel Wire, Cold Heading Quality 1673: 1984
68 Specification for Carbon Steel Wire for the Manufacture of Wood Screws 1812: 1982
69 Specification for Cold – rolled Steel Strips For Springs 2507: 1975
70 Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process) 2255: 1977
71 Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification 3195: 1992
72 Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension 3431: 1982
73 Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification 3885-Part-1: 1992
74 Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification 3885-Part- 2: 1992
75 Specification for Steel Wire for Umbrella Ribs 4223: 1975
76 Specification for Steel Wire for Staples, Pins And Clips 4224: 1972
77 Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification 4397: 1999
78 Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification 4398: 1994
79 Specification for Steel Wire for spokes 6902: 1973
80 Specification for Steel For Electrically welded round Link Chains 6967: 1973
81 Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes 7226: 1974
82 Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets 7557: 1982
83 Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification 8052: 2006
84 Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification 8951: 2001
85 Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification 8952: 1995
86 Specification for Cold rolled steel strips for carbon steel razor blades 9476: 1980
87 Specification for Steel Wire for Needles 9962: 1981
88 Heat-Treated Steels Alloy and Free-Cutting Steels — Ball and Roller Bearing Steels 17111: 2019 (ISO 683- 17: 2014)
89 Steels for High Temperature Bolting Applications – Specification 14331:1995
90 Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement – Specification 12594: 1988
91 Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- Specification 14650:1999
92 Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry 4882: 1979
93 Specification for High Tensile Steel Bars used in Pre-stressed Concrete 2090:1983
94 Stainless Steel Blooms Billets And Slabs For Forging 6529:1996
95 Cold-Rolled Stainless Steel Strips for Razor Blades 9294:1979
96 Stainless Steel for welding electrode core wire 10631:1983
97 Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire 10632 (Part 2):1983
98 Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates 10632 (Part 3):1983
99 Steels for cold heading/cold extrusion applications – specification Part 2 Stainless steel 11169 (Part 2): 1989
100 Steels for Pneumatic Tools 5651:1987
101 Heat Resisting Steels 9516:1980
102 Steels For Piston Pins (Gudgeon Pins) 11952:1986
103 Alloys Used in Electrical Resistance Metallic Heating Elements 12045:1987
104 18 Percent Nickel Maraging Steel Bars and Rods 14652:1999
105 Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement 1566:1982
106 Ferrochromium – Specification 1170: 1992
107 Soft Magnetic Iron Strips 11946:1987
108 Soft Magnetic Iron Rods, Bars Flats and Sections 11947:1987
109 Chrome molybdenum steel bars and rods for aircraft purposes 963: 1958
110 Steel Wires for Mechanical Springs- Part 4: Stainless Steel Wire 4454 (Part 4): 2001
111 Cold-reduced Electrolytic Tin Plate 1993 : 2018
112 Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel 12591:2018
113 Expanded Metal Steel Sheets For General Purposes 412:1975
114 Steel Billets,Bars And Sections For Boilers 2100: 1970
115 Hard Drawn Steel Wire For Upholstery Springs 2589: 1975
116 Mild Steel Rivet Bars For Ship Building 3298: 1981
117 Steel For Spring Washers 4072: 1975
118 Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires 8510 (Part II): 1977
119 Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires 8510 (PartIII): 1977
120 Half Round Mild Steel Wire For The Manufacture of Split Pins 8563: 1977
121 Steel Wire For Nipples For Spokes 8564: 1977
122 Heald Wire 8565: 1977
123 Steel Wire For Reeds 8566: 1977
124 Plates For Galvanizing Pots 8917: 1978
125 Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs 9442: 1980
126 Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling 9485: 1980
127 Mild steel wire for cotter pins 10794: 1984
128 Trapezoidal Steel Wire For Springs Washers 12262:1988
129 Silicomanganese – Specification 1470: 2013
130 Structural Steel (Ordinary Quality) 15911:2010
131 Ferromanganese – Specification 1171: 2011
132 Carbon And Carbon- Manganese Free- Cutting Steels 4431: 1978
133 Case Hardening Steels 4432: 1988
134 Steels For Die Blocks For Drop Forging 5518: 1996
135 Forged/Rolled CTC Segments 8748: 1978
136 Quenched And Tempered Alloy Steel Forgings For Pressure Vessels 12145: 1987
137 Tool Steel Forgings For Metal Forming 13387: 1992
138 Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services 14698:1999
139 Cold – Reduced tinmill products – Blackplate ISO 11951 : 2016
140 Flame And Induction Hardening Steels 3930: 1994
141 Thermostat Metal Sheet and Strip 5478: 1969
142 Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs 13352: 1992
143 Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete 16644: 2018
144 Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips 17404 : 2020
145 Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi/Fully Processed NonGrain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel 18316: 2023
146 Hot-Rolled Steel Strip, Sheet and Plates for Welded Steel Pipe for Pipeline Transportation Systems 18384: 2023
147 Hot- Dip galvanized/ galvannealed Steel Sheet and strips for Automotive Applications 18385: 2023
148 Hot-Dip Zinc – Aluminium – Magnesium Alloy Coated Steel Sheets, Plates and Strips 18513: 2023
149 Ferromolybdenum – Specification 1469: 1993
150 Specification for Ferro Vanadium 1466: 1985
151 Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage 8329 : 2000
152 Ductile iron fittings for pressure pipes for water, gas and sewage 9523:2000
153 Steel tubes for structural purposes 1161:2014
154 Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes 1239 (Part 1):2014
155 Steel tubes used for water-wells (upto 200 mm dia) 4270:2001
156 Specification for Malleable iron shots and grits for use in foundries 9139:1979

Frequently Asked Questions

The NOC (National Occupational Classification) code for steel fabricators in Canada is 7235, covering structural metal and platework fabricators and fitters.

Talk to a specialist

Share your details and we will reach out within one business day.

By submitting, you agree to our privacy policy and consent to be contacted.

Back to Mandatory CRS Standards