The kind and location of your firm determine whether you need a steel and iron product license. Important procedures include registering your company, getting the relevant industrial and trade permits, and adhering to environmental and safety requirements. If you manufacture, you may require an industrial license and pollution control clearance. Import/export requires registration with customs officials. Tax registration, such as VAT/GST, is required. Quality certifications such as ISO or conformity with industry standards may be required. The application procedure entails completing documents, paying fees, and undergoing inspections. Requirements differ by nation, therefore consulting with local regulatory organizations is recommended.
Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire
1785 (Part 1) : 1983Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire
1785 (Part 2) : 1983Indented wire for Pre-stressed concrete
6003:2010Uncoated stress relieved strand for Pre-stressed concrete
6006:2014Fusion bonded epoxy coated reinforcing bars
13620 : 1993Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete
14268:1995Galvanized steel sheets ( plain and corrugated)
277:2003Steel plates for pressure vessels for intermediate and high temperature service including boilers
2002:2009Steel plates for pressure vessels used at moderate and low temperature
2041:2009Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose
2830:2012High strength deformed steel bars and wires for concrete reinforcement
1786:2008Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO)
648:2006Grain oriented electrical steel sheet & strip (CRGO)
3024:2015Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification
15391:2003Hot rolled medium and high tensile structural steel
2062:2011Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars
432 : Part 1:1982Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire
432 : Part 2:1982Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose
513 (Part-1): 2016Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel
513(Part-2):2016Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification
1079: 2017Carbon steel billets, blooms, slabs and bars for forgings
1875:1992Mild steel for metal arc welding electrodes
2879:1998Steel Chequered Plates
3502:2009Cold Rolled Steel Strips (Box Strappings)
5872:1990Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification
5986: 2017Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders
6240:2008Hot Rolled bars for production of bright bars and machined parts for engineering applications
7283:1992Mild steel wire rods for general engineering purposes
7887:1992Hot Rolled Steel Strip for Welded Tubes and Pipes
10748:2004Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — Specification
11513:2017Hot rolled steel narrow width strip for welded tubes and pipes
15647:2006High carbon steel wire rods- Specification
7904:2017Continuously pre-painted galvanized steel sheets and coils
14246:2013Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain)
15965:2012Mild steel wire for General Engineering purposes
280: 2006Round Steel wire for ropes
1835:1976Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables
3975:1999Alloy Steel billets, blooms and slabs for forging for general engineering purposes
4368:1967Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire
4454 (Part 1) : 2001Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire
4454 (Part 2): 2001Bead Wires for Tyres
4824:2006Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels
11169 (Part 1): 1984Structural Weather resistant steel
11587:1986Fire resistant Steel- Specification
15103: 2002High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder
15914:2011Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain)
15961:2012Structural Steel for Building for Structures with improved seismic Resistance
15962:2012Stainless Steel wire Rod
6527:1995Stainless Steel Bars and Flats
6603:2001Stainless Steel sheets and strips for utensils- Specification
5522:2014Stainless Steel Plate, Sheet and Strip- Specification
6911:2017Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification
15997:2012Ferrosilicon – Specification
1110 : 1990Specification for Ferronickel
4409 : 1973Specification for Hot rolled steel strip (bailing)
1029 : 1970Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate
2385 : 1977Specification for Structural steel for construction of hulls of ships
3039 : 1988Bright steel bars – v Specification
9550 2001Tool and die steels – Specification
3748 : 1990Steel for hardening and tempering – Specification
5517 : 1993Galvanized Structural Steel – Specification
16732: 2019Specification for Steel for valves for internal combustion engines
7494 : 1981Specification for Carbon manganese steel forgings for pressure vessels
12146 : 1987Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state
16585 : 2016Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification
2831 : 2012Steel Rivet Bars (medium And High Tensile) – For Structural Purposes
1148: 2009Specification for Mild Steel Wire, Cold Heading Quality
1673: 1984Specification for Carbon Steel Wire for the Manufacture of Wood Screws
1812: 1982Specification for Cold – rolled Steel Strips For Springs
2507: 1975Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process)
2255: 1977Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification
3195: 1992Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension
3431: 1982Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification
3885-Part-1: 1992Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification
3885-Part- 2: 1992Specification for Steel Wire for Umbrella Ribs
4223: 1975Specification for Steel Wire for Staples, Pins And Clips
4224: 1972Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification
4397: 1999Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification
4398: 1994Specification for Steel Wire for spokes
6902: 1973Specification for Steel For Electrically welded round Link Chains
6967: 1973Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes
7226: 1974Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets
7557: 1982Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification
8052: 2006Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification
8951: 2001Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification
8952: 1995Specification for Cold rolled steel strips for carbon steel razor blades
9476: 1980Specification for Steel Wire for Needles
9962: 1981Heat-Treated Steels Alloy and Free-Cutting Steels — Ball and Roller Bearing Steels
17111: 2019 (ISO 683- 17: 2014)Steels for High Temperature Bolting Applications – Specification
14331:1995Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement – Specification
12594: 1988Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- Specification
14650:1999Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry
4882: 1979Specification for High Tensile Steel Bars used in Pre-stressed Concrete
2090:1983Stainless Steel Blooms Billets And Slabs For Forging
6529:1996Cold-Rolled Stainless Steel Strips for Razor Blades
9294:1979Stainless Steel for welding electrode core wire
10631:1983Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire
10632 (Part 2):1983Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates
10632 (Part 3):1983Steels for cold heading/cold extrusion applications – specification Part 2 Stainless steel
11169 (Part 2): 1989Steels for Pneumatic Tools
5651:1987Heat Resisting Steels
9516:1980Steels For Piston Pins (Gudgeon Pins)
11952:1986Alloys Used in Electrical Resistance Metallic Heating Elements
12045:198718 Percent Nickel Maraging Steel Bars and Rods
14652:1999Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement
1566:1982Ferrochromium – Specification
1170: 1992Soft Magnetic Iron Strips
11946:1987Soft Magnetic Iron Rods, Bars Flats and Sections
11947:1987Chrome molybdenum steel bars and rods for aircraft purposes
963: 1958Steel Wires for Mechanical Springs- Part 4: Stainless Steel Wire
4454 (Part 4): 2001Cold-reduced Electrolytic Tin Plate
1993 : 2018Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel
12591:2018Expanded Metal Steel Sheets For General Purposes
412:1975Steel Billets,Bars And Sections For Boilers
2100: 1970Hard Drawn Steel Wire For Upholstery Springs
2589: 1975Mild Steel Rivet Bars For Ship Building
3298: 1981Steel For Spring Washers
4072: 1975Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires
8510 (Part II): 1977Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires
8510 (PartIII): 1977Half Round Mild Steel Wire For The Manufacture of Split Pins
8563: 1977Steel Wire For Nipples For Spokes
8564: 1977Heald Wire
8565: 1977Steel Wire For Reeds
8566: 1977Plates For Galvanizing Pots
8917: 1978Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs
9442: 1980Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling
9485: 1980Mild steel wire for cotter pins
10794: 1984Trapezoidal Steel Wire For Springs Washers
12262:1988Silicomanganese – Specification
1470: 2013Structural Steel (Ordinary Quality)
15911:2010Ferromanganese – Specification
1171: 2011Carbon And Carbon- Manganese Free- Cutting Steels
4431: 1978Case Hardening Steels
4432: 1988Steels For Die Blocks For Drop Forging
5518: 1996Forged/Rolled CTC Segments
8748: 1978Quenched And Tempered Alloy Steel Forgings For Pressure Vessels
12145: 1987Tool Steel Forgings For Metal Forming
13387: 1992Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services
14698:1999Cold – Reduced tinmill products – Blackplate
ISO 11951 : 2016Flame And Induction Hardening Steels
3930: 1994Thermostat Metal Sheet and Strip
5478: 1969Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs
13352: 1992Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete
16644: 2018Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips
17404 : 2020Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi/Fully Processed NonGrain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel
18316: 2023Hot-Rolled Steel Strip, Sheet and Plates for Welded Steel Pipe for Pipeline Transportation Systems
18384: 2023Hot- Dip galvanized/ galvannealed Steel Sheet and strips for Automotive Applications
18385: 2023Hot-Dip Zinc – Aluminium – Magnesium Alloy Coated Steel Sheets, Plates and Strips
18513: 2023Ferromolybdenum – Specification
1469: 1993Specification for Ferro Vanadium
1466: 1985Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage
8329 : 2000Ductile iron fittings for pressure pipes for water, gas and sewage
9523:2000Steel tubes for structural purposes
1161:2014Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes
1239 (Part 1):2014Steel tubes used for water-wells (upto 200 mm dia)
4270:2001Specification for Malleable iron shots and grits for use in foundries
9139:1979The NOC (National Occupational Classification) code for steel fabricators in Canada is 7235, covering structural metal and platework fabricators and fitters.
The NOC code for steel product manufacturing workers varies but generally falls under 9411 for metalworking and forging machine operators.
ISI stands for Indian Standards Institute, which certifies the quality and safety of steel and other industrial products in India.
Businesses in manufacturing, construction, import/export, and industries requiring environmental, safety, or trade compliance typically need a No Objection Certificate (NOC) from relevant authorities.
The NOC code for manufacturing varies by industry, but 9617 (labourers in metal fabrication) and 9231 (central control operators) are common in steel manufacturing.
