India’s toy manufacturing sector is expanding rapidly, driven by government support, import restrictions, and rising demand for locally made toys. However, toys fall under high-risk consumer products, and compliance is strictly regulated.
For any toy manufacturing startup, understanding and implementing the right regulatory framework is essential—not just to enter the market, but to scale without disruptions.
This guide explains the mandatory compliances for toy manufacturing in India, covering plastic toys, wooden toys, STEM toys, and electrical toys, along with export requirements.
1. Why Compliance Matters in Toy Manufacturing
Toys are designed for children, which makes safety the central regulatory concern. Hazards such as sharp edges, toxic substances, small detachable parts, and electrical risks can have serious consequences.
Because of this, the Government of India mandates:
- Compulsory BIS certification
- Periodic product testing
- Factory-level quality controls
- Accurate labeling and packaging declarations
Non-compliance can result in product seizure, cancellation of licences, or prohibition from selling in Indian or international markets.
2. BIS Certification for Toys – IS 9873 (Part 1)
Mandatory Requirement for All Toys
All toys manufactured or sold in India must comply with IS 9873 (Part 1): Safety of Toys and obtain a BIS licence before market launch.
This requirement applies regardless of the toy material, including:
- Plastic toys
- Wooden toys
- Rubber or fabric toys
- Educational and STEM toys
What IS 9873 (Part 1) Covers
- Mechanical and physical safety
- Sharp edges, points, and small parts
- Choking and entrapment hazards
- Flammability
- Labelling, warnings, and age grading
A BIS licence is issued only after successful product testing and factory assessment.
3. Product Testing and Ongoing BIS Compliance
BIS compliance is not limited to initial approval. Manufacturers must maintain continuous conformity.
Key Compliance Obligations
- Product testing at BIS-recognised laboratories
- Testing at prescribed intervals
- Re-testing if there is any change in design, material, or supplier
- Maintenance of quality control and inspection records
These requirements apply uniformly across plastic, wooden, and STEM toys. The focus is always on safety, not material type.
4. Electrical and Battery-Operated Toys – IS 15644
Toys containing electrical or electronic components are subject to additional regulations.
If your toy includes:
- Batteries or rechargeable cells
- Motors or electronic circuits
- Charging adapters or power connectors
It must comply with IS 15644 – Safety of Electric Toys, in addition to IS 9873 (Part 1).
IS 15644 addresses:
- Electrical insulation and protection
- Heating and fire risks
- Short-circuit safety
- Battery and charger safety
Electrical toys require dual compliance and testing under both standards.
5. Legal Metrology (LMPC) Registration for Packaged Toys
Any toy sold in packaged form must comply with Legal Metrology – LMPC registration.
LMPC Covers:
- Manufacturer or packer details
- Country of origin
- Month and year of manufacture
- Maximum Retail Price (MRP)
- Quantity declaration
- Consumer grievance information
LMPC compliance is frequently checked during market surveillance and e-commerce onboarding. Completing it early helps avoid regulatory interruptions later.
6. Exporting Toys: Gulf and Global Compliance Requirements
For manufacturers planning to export toys outside India, domestic compliance alone is not sufficient.
Exports to UAE, Saudi Arabia, and GCC Countries
- G-Mark Certification is mandatory
- Product testing must be conducted as per EN 71 standards
EN 71 for International Buyers
EN 71 is the most widely accepted toy safety standard globally. Even when not legally mandated, many international buyers require EN 71 test reports as a condition for procurement.
EN 71 includes:
- Mechanical and physical safety
- Chemical safety and heavy metal limits
- Flammability requirements
7. How Instacertify Supports Toy Manufacturers
Instacertify provides structured compliance support for toy manufacturers at every stage of growth.
Our services include:
- BIS licence under IS 9873 (Part 1)
- IS 15644 compliance for electrical toys
- Product testing through recognised laboratories
- LMPC registration and label verification
- EN 71 testing for export markets
- G-Mark certification for Gulf countries
- Documentation, audits, and ongoing compliance management
Our team has hands-on experience across multiple toy categories and regulatory frameworks.
