IPv6 Ready Logo Test Lab

An IPv6 Ready Logo Test Lab is a specialized facility accredited by the IPv6 Ready Logo Committee (v6LC). These labs are the only entities authorized to perform the official conformance and interoperability testing required for certification. They run automated scripts and physical test scenarios to ensure a product strictly follows IPv6 protocols. Without a test report from an accredited lab, a product cannot claim the "Ready Logo."

Any manufacturer (OEM), brand owner, or authorized importer of networking equipment can apply. Whether you are a large multinational corporation or a startup developing IoT devices, if your product supports IPv6, you are eligible. It is particularly crucial for companies selling to government bodies, ISPs, or enterprises that mandate "IPv6 Gold" compliance in their procurement policies.

The testing scope covers almost any device that connects to an IP network. Common categories include:

• Core Networking: Routers, Layer 3 Switches, and Gateways.
• Security: Firewalls, IDP/IPS, and VPN Concentrators.
• End Devices: Host Operating Systems (Windows, Linux), Smartphones, and Laptops.
• IoT & Smart Tech: Embedded sensors, Smart Meters, and Home Automation hubs.
• CPE: Modems, ONTs, and Wi-Fi Access Points.

To initiate testing, the lab requires a specific technical dossier:

• Product Manuals: User guide and command-line interface (CLI) references.
• Technical Specs: Datasheets detailing hardware and firmware versions.
• PICS: Protocol Implementation Conformance Statement (a checklist of supported features).
• Topology Diagrams: Network setup required for the device.
• Authorization Letter: If an agency is applying on behalf of the OEM.

The certification workflow is systematic and rigorous:

1. Gap Analysis: Pre-assessment to identify potential failures.
2. Lab Booking: Selecting an accredited lab and paying testing fees.
3. Sample Submission: Shipping the hardware or providing remote access to the software.
4. Testing Phase: The lab executes hundreds of test cases (Core, IPsec, DHCP, etc.).
5. Debugging: If failures occur, engineers fix firmware; retesting is done.
6. Final Report: The lab issues a validated test report.
7. Logo Grant: Submit the report to the v6LC to receive the Logo ID.

The timeline depends heavily on the product's complexity and readiness.

• Testing Phase: Typically takes 3 to 5 weeks for a standard router or switch.
• Report Generation: 1 week post-testing.
• Logo Approval: The committee usually takes 1 to 2 weeks to review and award the ID.

Note: Failures and debugging will extend this timeline.

Costs are not fixed and vary based on the device's specific functions. Factors influencing the quote include:

• Device Role: Routers generally cost more to test than simple Hosts.
• Features: Adding IPsec, IKEv2, or DHCPv6 increases the scope and price.
• Lab Fees: Each accredited lab has its own rate card.
• Consultancy: Fees for pre-testing support and management.

Contact us for a precise quote based on your product specs.