Mandatory BIS Standard
ISI Mark for Aluminium and Aluminium Alloy Products
- Minimum marking fee per year
- ₹9,200 – ₹2,67,000
- Micro to large firms
- Testing cost
- ₹1,500 – ₹2,30,000
- Based on 15 lab prices
- HSN codes
- 76041010, 76012010, 76061190
- Check the code with customs
Aluminium and Aluminium Alloy Products BIS Certification Licence guarantees quality and safety conformity with Indian Standards (IS). Manufacturers must follow pertinent IS norms including IS 617 and IS 733.
Applicable Indian Standards for ISI Mark for Aluminium and Aluminium Alloy Products
| IS number | Product | Status | Testing cost |
|---|---|---|---|
| IS 7092 (Part 1):1992 | Aluminium alloy tubes for irrigation purposes -welded tubes | — | |
| IS 7092 (Part 2):1987 | Aluminium alloy tube for irrigation purposes – extruded tube | Date not setComing – order issued Phased from 2025 | ₹14,800 – ₹15,0002 labs |
| IS 5484:1997 | EC Grade Aluminium Rod produced by Continuous Casting and Rolling | Date not setComing – order issued Phased from 2025 | ₹10,000 – ₹12,5003 labs |
| IS 733:1983 | Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) | Mandatory soonMandatory from 1 Dec 2026 | ₹5,000 – ₹12,80015 labs |
| IS 734:1975 | Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes | Mandatory soonMandatory from 1 Dec 2026 | ₹1,500 – ₹15,0006 labs |
| IS 736:1986 | Wrought aluminium and aluminium alloy plate for general engineering purposes | Mandatory soonMandatory from 1 Dec 2026 | ₹6,900 – ₹15,0006 labs |
| IS 737:2008 | Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes | Mandatory soonMandatory from 1 Dec 2026 | ₹5,200 – ₹20,0008 labs |
| IS 739:1992 | Wrought aluminium and aluminium alloy wire for general engineering purposes | Mandatory soonMandatory from 1 Dec 2026 | ₹6,500 – ₹20,0003 labs |
| IS 740:1977 | Wrought aluminium and aluminium alloy rivet stock for general engineering purposes | Mandatory soonMandatory from 1 Dec 2026 | ₹6,400 – ₹12,5002 labs |
| IS 5082:1998 | Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications | Mandatory soonMandatory from 1 Dec 2026 | ₹9,400 – ₹15,0004 labs |
| IS 16011:2012 | Aluminium and aluminium alloy foil for pharmaceutical packaging | ₹9,0002 labs | |
| IS 17682:2021 | Aluminium composite panel | ₹50,000 – ₹2,30,0003 labs | |
| IS 1285:2002 | Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes | Mandatory soonMandatory from 1 Dec 2026 | ₹5,500 – ₹15,0009 labs |
| IS 2067:1975 | Wrought Aluminium Wire for Electrical Purposes | Mandatory soonMandatory from 1 Dec 2026 | ₹15,0001 lab |
| IS 21:1992 | Wrought aluminium and aluminium alloys for manufacture of utensils | Mandatory soonMandatory from 1 Dec 2026 | ₹5,400 – ₹70,0009 labs |
| IS 1254:2007 | Corrugated Aluminium Sheet | Date not setComing – order issued Phased from 2025 | ₹11,000 – ₹12,5003 labs |
| IS 7902:2001 | Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications | — |
- Legal order: Aluminium & Aluminium Alloy Products QCO, 2024; effective phased 2025
- Legal order: Aluminium & Aluminium Alloy Products QCO (DPIIT); enforcement due 01-12-2026
- Legal order: Aluminium & Aluminium Alloy Products QCO (DPIIT) - alloys for utensil manufacture; enforcement due 01-12-2026
Minimum marking fee by firm size
You pay BIS a minimum marking fee every year. Micro, small and medium firms (with Udyam registration) pay less. BIS also works out a fee from the unit rate and your production. You pay whichever amount is higher.
| IS number | Large | Medium | Small | Micro | Unit rate |
|---|---|---|---|---|---|
| IS 7092 (Part 2):1987 | ₹83,000 | ₹67,000 | ₹41,500 | ₹16,600 | ₹87 per tonne |
| IS 5484:1997 | ₹60,000 | ₹48,000 | ₹30,000 | ₹12,000 | ₹34.60 per tonne |
| IS 733:1983 | ₹72,000 | ₹58,000 | ₹36,000 | ₹14,400 | ₹34.30 per tonne |
| IS 734:1975 | ₹46,000 | ₹37,000 | ₹23,000 | ₹9,200 | — |
| IS 736:1986 | ₹55,000 | ₹44,000 | ₹27,500 | ₹11,000 | ₹22 per tonne |
| IS 737:2008 | ₹65,000 | ₹52,000 | ₹32,500 | ₹13,000 | ₹15.40 per tonne |
| IS 739:1992 | ₹95,000 | ₹76,000 | ₹47,500 | ₹19,000 | ₹65.85 per tonne |
| IS 740:1977 | ₹46,000 | ₹37,000 | ₹23,000 | ₹9,200 | — |
| IS 5082:1998 | ₹60,000 | ₹48,000 | ₹30,000 | ₹12,000 | ₹24 per tonne |
| IS 16011:2012 | ₹1,06,000 | ₹85,000 | ₹53,000 | ₹21,200 | ₹21.50 per tonne |
| IS 17682:2021 | ₹2,67,000 | ₹2,14,000 | ₹1,33,500 | ₹53,400 | ₹14.40 per 100 sq m |
| IS 1285:2002 | ₹87,000 | ₹70,000 | ₹43,500 | ₹17,400 | ₹17.40 per tonne |
| IS 2067:1975 | ₹46,000 | ₹37,000 | ₹23,000 | ₹9,200 | — |
| IS 21:1992 | ₹64,000 | ₹52,000 | ₹32,000 | ₹12,800 | ₹160 per tonne |
| IS 1254:2007 | ₹1,12,000 | ₹90,000 | ₹56,000 | ₹22,400 | ₹26 per tonne |
| IS 7902:2001 | ₹1,21,000 | ₹97,000 | ₹60,500 | ₹24,200 | ₹26.50 per tonne |
- Other BIS charges
- ₹9,000 for every ISI mark product: application charge ₹1,000 · licence fee ₹1,000 · audit charges ₹7,000
- Foreign manufacturers
- Get a detailed quote
- Our consulting fee
- Best-value quote – let’s talk
All prices are a guide only and do not include GST. Rules and dates can change, so check the latest notice before you apply. Ask us for an up-to-date quote.
Common questions
What is BIS certification for Aluminium products?
BIS certification ensures compliance with Indian Standards (IS) for quality, safety, and performance, allowing manufacturers to use the ISI mark.
Which IS codes apply to Aluminium products?
Key standards include IS 737 (Sheets), IS 5082 (Bars, Rods, Tubes), IS 2676 (Wires), IS 1285 (Extruded Tubes).
How to apply for BIS certification?
Apply online at bis.gov.in, submit documents, conduct product testing in a BIS-approved lab, and undergo factory inspection.
How long does BIS certification take?
The process typically takes 30-90 days, depending on product testing and factory inspection results.
Is factory inspection mandatory for BIS certification?
Yes, BIS officials inspect manufacturing facilities for compliance with standards before granting certification.
Related products
- ISI Mark for Aluminium Alloy Redraw Rods for Electrical Purposes – IS 9997Date not set
- ISI Mark for Aluminium alloy hardeners (Master alloys) – IS 2047Date not set
- ISI Mark for Cookware, Utensils and Cans for food and BeveragesMandatory
- ISI Mark for Copper ProductsDate not set
- ISI Mark for Kadahi – IS 4109Mandatory
- ISI Mark for Metal & AlloysDate not set
- ISI Mark for Wrought aluminium alloys, drawn tube for general engineering purposes – IS 738Date not set
- BIS ISI Mark Certification for Air Purifier IS 302 Part 1Mandatory
Not sure which certification you need?
Send us the product name and the countries you sell in. A specialist replies with the standards that apply, the documents to prepare, the lab cost and the timeline. The assessment is free.
- The list of approvals comes to you in writing
- Get Started with the Right Expert
- Testing, certification and registrations handled by one team
Thank you — we've got it.
A certification specialist will contact you within 1 business day, usually much sooner.
Need it faster? WhatsApp us