Voluntary BIS Standards

ISI Mark for Copper Alloy Gate, Globe and Check Valves for Waterworks Purposes – IS 778

VoluntaryPumps, Valves & Irrigation

BIS ISI mark (Scheme-I)

IS 778

Minimum marking fee per year: ₹11,400 – ₹57,000; Micro to large firms
HSN code: 84818090; Check the code with customs

There is no Quality Control Order (QCO) for Copper Alloy Gate, Globe and Check Valves for Waterworks Purposes today. This means the ISI mark for IS 778 is optional. Many makers still get it, because government tenders, large buyers and online marketplaces often ask for it.

How it works: a BIS-approved lab tests your samples against IS 778. A BIS officer then visits your factory. If everything is in order, BIS gives you a licence. You can then print the ISI mark with your licence number (CM/L number). Factories outside India apply under the Foreign Manufacturers Certification Scheme (FMCS). They must also name a representative in India, called an Authorised Indian Representative (AIR).

Every year you pay BIS a minimum marking fee. It is ₹11,400 for micro firms and ₹57,000 for large firms. The fee also depends on how much you make: ₹0.60 per piece. You pay whichever amount is higher. These prices are a guide only and do not include GST.

Indian Standard covered

IS number	Product
IS 778	Copper Alloy Gate, Globe and Check Valves for Waterworks Purposes

Minimum marking fee by firm size

You pay BIS a minimum marking fee every year. Micro, small and medium firms (with Udyam registration) pay less. BIS also works out a fee from the unit rate and your production. You pay whichever amount is higher.

Large firms: ₹57,000
Medium firms: ₹46,000
Small firms: ₹28,500
Micro firms: ₹11,400

Unit rate: ₹0.60 per piece

Other BIS charges: ₹9,000 for every ISI mark product: application charge ₹1,000 · licence fee ₹1,000 · audit charges ₹7,000
Foreign manufacturers: Get a detailed quote
Our consulting fee: Best-value quote – let’s talk

All prices are a guide only and do not include GST. Rules and dates can change, so check the latest notice before you apply. Ask us for an up-to-date quote.

Common questions

Is BIS certification mandatory for this product?

No. There is no Quality Control Order for it today, so the ISI mark is optional. It can still help you win tenders and gain the trust of buyers.

What is the BIS marking fee for this product?

The minimum fee each year is ₹57,000 for large firms, ₹46,000 for medium firms, ₹28,500 for small firms and ₹11,400 for micro firms. Your firm size comes from your Udyam registration. BIS also works out a fee at ₹0.60 per piece. You pay the higher amount. GST is extra. These figures are a guide, based on the BIS fee list.

How much does testing for IS 778 cost?

The price depends on the lab, the number of models and the tests needed. Send us your product details and we will get quotes from BIS-approved labs.

What is the HSN code for this product?

It usually comes under HSN 84818090. Check the code on your bill of entry, because customs decides the code for the exact product.

Can a foreign manufacturer get the ISI mark?

Yes. Factories outside India apply under the Foreign Manufacturers Certification Scheme (FMCS). They must also name a representative in India, called an Authorised Indian Representative (AIR). The licence is in the name of the factory. Once the product is mandatory, importers cannot clear the goods at customs without it.

How long does BIS certification take?

Factories in India usually get a licence 30 to 60 days after a good test report. Factories outside India (FMCS) should plan for four to six months, including the factory visit.

See all 1,071 in Voluntary BIS Standards

Not sure which certification you need?

Send us the product name and the countries you sell in. A specialist replies with the standards that apply, the documents to prepare, the lab cost and the timeline. The assessment is free.

The list of approvals comes to you in writing
Get Started with the Right Expert
Testing, certification and registrations handled by one team

+91 99991 18039 WhatsApp us