Voluntary BIS Standards
ISI Mark for Injection moulded PVC socket fittings with solvent cement joints for water supplies – IS 7834 (Part 7)
BIS ISI mark (Scheme-I)
IS 7834 (Part 7)
- Minimum marking fee per year
- ₹11,400 – ₹57,000
- Micro to large firms
- Testing cost
- ₹500 – ₹8,000
- Based on 13 lab prices
- HSN code
- 39174000
- Check the code with customs
There is no Quality Control Order (QCO) for Injection moulded PVC socket fittings with solvent cement joints for water supplies today. This means the ISI mark for IS 7834 (Part 7) is optional. Many makers still get it, because government tenders, large buyers and online marketplaces often ask for it.
How it works: a BIS-approved lab tests your samples against IS 7834 (Part 7). A BIS officer then visits your factory. If everything is in order, BIS gives you a licence. You can then print the ISI mark with your licence number (CM/L number). Factories outside India apply under the Foreign Manufacturers Certification Scheme (FMCS). They must also name a representative in India, called an Authorised Indian Representative (AIR).
Every year you pay BIS a minimum marking fee. It is ₹11,400 for micro firms and ₹57,000 for large firms. The fee also depends on how much you make: ₹10.30 per 100 pieces. You pay whichever amount is higher. Lab testing costs about ₹500 – ₹8,000 per sample, based on quotes from 13 BIS-approved labs. These prices are a guide only and do not include GST.
Indian Standard covered
| IS number | Product | Testing cost |
|---|---|---|
| IS 7834 (Part 7) | Injection moulded PVC socket fittings with solvent cement joints for water supplies – Specific requirements for unions | ₹500 – ₹8,00013 labs |
Minimum marking fee by firm size
You pay BIS a minimum marking fee every year. Micro, small and medium firms (with Udyam registration) pay less. BIS also works out a fee from the unit rate and your production. You pay whichever amount is higher.
- Large firms
- ₹57,000
- Medium firms
- ₹46,000
- Small firms
- ₹28,500
- Micro firms
- ₹11,400
Unit rate: ₹10.30 per 100 pieces
- Other BIS charges
- ₹9,000 for every ISI mark product: application charge ₹1,000 · licence fee ₹1,000 · audit charges ₹7,000
- Foreign manufacturers
- Get a detailed quote
- Our consulting fee
- Best-value quote – let’s talk
All prices are a guide only and do not include GST. Rules and dates can change, so check the latest notice before you apply. Ask us for an up-to-date quote.
Common questions
Is BIS certification mandatory for this product?
No. There is no Quality Control Order for it today, so the ISI mark is optional. It can still help you win tenders and gain the trust of buyers.
What is the BIS marking fee for this product?
The minimum fee each year is ₹57,000 for large firms, ₹46,000 for medium firms, ₹28,500 for small firms and ₹11,400 for micro firms. Your firm size comes from your Udyam registration. BIS also works out a fee at ₹10.30 per 100 pieces. You pay the higher amount. GST is extra. These figures are a guide, based on the BIS fee list.
How much does testing for IS 7834 (Part 7) cost?
Lab charges are usually ₹500 – ₹8,000 per sample. This is based on quotes from 13 BIS-approved labs. The final price depends on your model, its versions and the tests needed.
What is the HSN code for this product?
It usually comes under HSN 39174000. Check the code on your bill of entry, because customs decides the code for the exact product.
Can a foreign manufacturer get the ISI mark?
Yes. Factories outside India apply under the Foreign Manufacturers Certification Scheme (FMCS). They must also name a representative in India, called an Authorised Indian Representative (AIR). The licence is in the name of the factory. Once the product is mandatory, importers cannot clear the goods at customs without it.
How long does BIS certification take?
Factories in India usually get a licence 30 to 60 days after a good test report. Factories outside India (FMCS) should plan for four to six months, including the factory visit.
Related products
- ISI Mark for Adhesive for use with ceramic, mosaic and stone tiles – IS 15477Voluntary
- ISI Mark for App Modified Bituminous Waterproofing and Damp-Proofing Membrane with Polyester – IS 16532Voluntary
- ISI Mark for Artificial Lightweight Aggregate for Concrete – Sintered Fly Ash Coarse Aggregate – IS 9142 (Part 2)Voluntary
- ISI Mark for Asbestos Cement Building types and Pipe Fittings, Gutters and Gutter Fittings and Roofing – IS 1626 (Part 3)Voluntary
- ISI Mark for Asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing – IS 1626 (Part 2)Voluntary
- ISI Mark for Autoclaved Reinforced Cellular Concrete Floor and Roof Slabs – IS 6073Voluntary
- ISI Mark for Autoclaved reinforced cellular concrete wall slabs – IS 6072Voluntary
- ISI Mark for Bonded mineral wool – IS 8183Voluntary
Not sure which certification you need?
Send us the product name and the countries you sell in. A specialist replies with the standards that apply, the documents to prepare, the lab cost and the timeline. The assessment is free.
- The list of approvals comes to you in writing
- Get Started with the Right Expert
- Testing, certification and registrations handled by one team
Thank you — we've got it.
A certification specialist will contact you within 1 business day, usually much sooner.
Need it faster? WhatsApp us