LED Luminaire Testing (IS 10322)

Get your LED luminaires tested to the right part of IS 10322 for BIS registration, and measured for the photometric performance tenders ask for.

4.9/5Rated by 28 clients

How LED Luminaire Testing (IS 10322) works

1Assessment of requirement
2Sample collection
3Right lab assigned
4Testing
5Test report

Each step explained

Trusted by Leading Brands Across the Globe

Overview of LED Luminaire Testing (IS 10322)

Tested by: BIS-recognised partner lab
Regulation: IS 10322 & BIS CRS
Typical turnaround: 10–15 working days
Sample needed: 2–4 units per model

LED luminaires sold in India must be registered with BIS under the Compulsory Registration Scheme (CRS). Safety is tested to IS 10322: Part 1 sets general requirements, and the sections of Part 5 cover particular types such as fixed general-purpose luminaires, recessed luminaires, road and street lights, flood lights and others. The LED driver is tested separately to its own standard, IS 15885.

Tests cover marking, construction, creepage and clearance, earthing, insulation resistance, electric strength, heating, ingress protection and resistance to heat and fire. Government tenders, smart-city projects and energy-efficiency programmes also ask for photometric (LM-79) data such as lumen output, efficacy and light distribution. Self-ballasted LED lamps follow a different standard; see IS 16102.

What we do for you

Lab and parameter list chosen for your purpose: licence, export, buyer or internal QC
Sampling guidance, and pickup or on-site sampling where needed
One contact who follows up with the lab until the report is issued
Report explained in plain language, with next steps if a result fails

What to send

The lab confirms the exact quantity and packing for your product when we book the test.

Sample

Quantity: 2–4 units per model
Sealed and labelled with the product name, batch number and date
Packed securely so that it is not damaged in transit

Details to share

Model list with ratings, and the series or family you want covered
Circuit diagram, critical components list and user manual
The Indian Standard or IEC standard that applies
BIS registration or licence number, if you already have one

How we handle LED Luminaire Testing (IS 10322)

1
Assessment of requirement
We confirm the standard, the list of tests and how many samples your product needs.
2
Sample collection
We collect the samples from your factory or warehouse, or tell you exactly where to send them.
3
Right lab assigned
We choose an accredited lab (NABL, BIS-recognised or ILAC) that covers your standard and can start soonest.
4
Testing
The lab tests your samples against the standard. We follow up and tell you at once if a test fails.
5
Test report
You receive the signed test report, ready to use for BIS, WPC, CE or your buyer.

What the lab tests

Parameter	Why it is checked
Construction and marking	Against IS 10322 Part 1 and the relevant Part 5 section
Insulation resistance and electric strength	Protection against electric shock
Creepage, clearance and earthing	Electrical safety design
Heating and endurance	Temperatures of parts in operation
Ingress protection (IP)	Outdoor and damp-location luminaires
Photometry	Lumen output, efficacy, CCT, CRI, light distribution

The final list depends on your product, its standard and the purpose of testing. We confirm it with you before the sample goes to the lab.

Frequently asked questions

Can several luminaire models be covered by one test?

BIS allows models in a series to be grouped when construction and the driver are the same, with the worst-case model tested. The grouping must follow BIS guidelines, which we check before samples go to the lab.

Will BIS accept the report?

For BIS registration and licences, testing is done at a lab recognised by BIS for that standard, and BIS accepts reports only from such labs. For tenders and buyers, a NABL-accredited lab report is usually enough. We confirm which applies before booking.

Who carries out the testing?

Instacertify’s partner laboratories, accredited by NABL to ISO/IEC 17025 for the parameters on your report. We choose the lab, arrange the sample, follow up until the report is issued and explain the results to you.

What our clients say

“Instacertify helped us get BIS CRS certification for our entire product range within just 6 weeks. Their team handled everything from documentation to lab coordination. Highly professional service.”

Akash GuptaBIS CRS · Electronics brand

“They handled complete certification for us, from ISO 9001 to BIS for PVC cables and plugs. Thorough, professional and always available — they knew what needed to be done and when.”

Shivank VishnoiISO 9001 & BIS · Cables

“Getting TEC approvals for our access-control products seemed confusing and complex, but Instacertify made it simple.”

Jiten ShahTEC approval · Access control

Not sure which certification you need?

Send us the product name and the countries you sell in. A specialist replies with the standards that apply, the documents to prepare, the lab cost and the timeline. The assessment is free.

The list of approvals comes to you in writing
Get Started with the Right Expert
Testing, certification and registrations handled by one team

+91 99991 18039 WhatsApp us

Get a free assessment