Mandatory BIS Standard
ISI Mark for Carbon steel billets, blooms, slabs and bars for forgings – IS 1875
BIS ISI mark (Scheme-I)
IS 1875
- Minimum marking fee per year
- ₹12,000 – ₹60,000
- Micro to large firms
- Testing cost
- ₹5,000 – ₹16,000
- Based on 5 lab prices
- HSN code
- 72071920
- Check the code with customs
Carbon steel billets, blooms, slabs and bars for forgings must carry the ISI mark. The Indian Standard for it is IS 1875. The legal order is: Steel and Steel Products QCO (2012-2024 series, Ministry of Steel); phased coverage. You cannot make, import, sell or store this product for sale in India without a valid BIS licence.
How it works: a BIS-approved lab tests your samples against IS 1875. A BIS officer then visits your factory. If everything is in order, BIS gives you a licence. You can then print the ISI mark with your licence number (CM/L number). Factories outside India apply under the Foreign Manufacturers Certification Scheme (FMCS). They must also name a representative in India, called an Authorised Indian Representative (AIR).
Every year you pay BIS a minimum marking fee. It is ₹12,000 for micro firms and ₹60,000 for large firms. The fee also depends on how much you make: ₹3.60 per tonne. You pay whichever amount is higher. Lab testing costs about ₹5,000 – ₹16,000 per sample, based on quotes from 5 BIS-approved labs. These prices are a guide only and do not include GST.
Indian Standard covered
| IS number | Product | Testing cost |
|---|---|---|
| IS 1875 | Carbon steel billets, blooms, slabs and bars for forgings | ₹5,000 – ₹16,0005 labs |
- Legal order: Steel and Steel Products QCO (2012-2024 series, Ministry of Steel); phased coverage
Minimum marking fee by firm size
You pay BIS a minimum marking fee every year. Micro, small and medium firms (with Udyam registration) pay less. BIS also works out a fee from the unit rate and your production. You pay whichever amount is higher.
- Large firms
- ₹60,000
- Medium firms
- ₹48,000
- Small firms
- ₹30,000
- Micro firms
- ₹12,000
Unit rate: ₹3.60 per tonne
- Other BIS charges
- ₹9,000 for every ISI mark product: application charge ₹1,000 · licence fee ₹1,000 · audit charges ₹7,000
- Foreign manufacturers
- Get a detailed quote
- Our consulting fee
- Best-value quote – let’s talk
All prices are a guide only and do not include GST. Rules and dates can change, so check the latest notice before you apply. Ask us for an up-to-date quote.
Common questions
Is BIS certification mandatory for Carbon steel billets, blooms, slabs and bars for forgings?
Yes. IS 1875 is mandatory. The product must carry the ISI mark and a valid licence number.
What is the BIS marking fee for Carbon steel billets, blooms, slabs and bars for forgings?
The minimum fee each year is ₹60,000 for large firms, ₹48,000 for medium firms, ₹30,000 for small firms and ₹12,000 for micro firms. Your firm size comes from your Udyam registration. BIS also works out a fee at ₹3.60 per tonne. You pay the higher amount. GST is extra. These figures are a guide, based on the BIS fee list.
How much does testing for IS 1875 cost?
Lab charges are usually ₹5,000 – ₹16,000 per sample. This is based on quotes from 5 BIS-approved labs. The final price depends on your model, its versions and the tests needed.
What is the HSN code for Carbon steel billets, blooms, slabs and bars for forgings?
It usually comes under HSN 72071920. Check the code on your bill of entry, because customs decides the code for the exact product.
Can a foreign manufacturer get the ISI mark?
Yes. Factories outside India apply under the Foreign Manufacturers Certification Scheme (FMCS). They must also name a representative in India, called an Authorised Indian Representative (AIR). The licence is in the name of the factory. Once the product is mandatory, importers cannot clear the goods at customs without it.
How long does BIS certification take?
Factories in India usually get a licence 30 to 60 days after a good test report. Factories outside India (FMCS) should plan for four to six months, including the factory visit.
Related products
- ISI Mark for Alloy steel billets, blooms and slabs for forging for general engineering purposes – IS 4368Mandatory
- ISI Mark for Carbon Steel Cast Billet Ignots, Billets, Blooms and Slabs for Re-rolling into Structural – IS 2831Mandatory
- ISI Mark for Carbon steel cast billet ingots,billets,blooms and slabs for re-rolling into steel – IS 2830Mandatory
- ISI Mark for Chlorinated Polyvinyl Chloride CPVC Resin – IS 17988Date not set
- ISI Mark for Ethylene Vinyl Acetate (eva) Copolymers for its Safe Use in Contact with Foodstuffs – IS 13601Date not set
- ISI Mark for Feeding Bottles ManufacturerMandatory
- ISI Mark for Geo TextilesMandatory
- ISI Mark for Geosynthetics- Prefabricated Vertical Drains for Quick Consolidation for Very Soft Plastic – IS 18309Mandatory
Not sure which certification you need?
Send us the product name and the countries you sell in. A specialist replies with the standards that apply, the documents to prepare, the lab cost and the timeline. The assessment is free.
- The list of approvals comes to you in writing
- Get Started with the Right Expert
- Testing, certification and registrations handled by one team
Thank you — we've got it.
A certification specialist will contact you within 1 business day, usually much sooner.
Need it faster? WhatsApp us