Voluntary BIS Standards
ISI Mark for Polyethylene containers for the transport of materials – IS 6312
BIS ISI mark (Scheme-I)
IS 6312
- Minimum marking fee per year
- ₹17,128 – ₹85,640
- Micro to large firms
- HSN code
- 39232990
- Check the code with customs
There is no Quality Control Order (QCO) for Polyethylene containers for the transport of materials today. This means the ISI mark for IS 6312 is optional. Many makers still get it, because government tenders, large buyers and online marketplaces often ask for it.
How it works: a BIS-approved lab tests your samples against IS 6312. A BIS officer then visits your factory. If everything is in order, BIS gives you a licence. You can then print the ISI mark with your licence number (CM/L number). Factories outside India apply under the Foreign Manufacturers Certification Scheme (FMCS). They must also name a representative in India, called an Authorised Indian Representative (AIR).
Every year you pay BIS a minimum marking fee. It is ₹17,128 for micro firms and ₹85,640 for large firms. The fee also depends on how much you make: ₹0.14 per piece. You pay whichever amount is higher. These prices are a guide only and do not include GST.
Indian Standard covered
| IS number | Product |
|---|---|
| IS 6312 | Polyethylene containers for the transport of materials |
Minimum marking fee by firm size
You pay BIS a minimum marking fee every year. Micro, small and medium firms (with Udyam registration) pay less. BIS also works out a fee from the unit rate and your production. You pay whichever amount is higher.
- Large firms
- ₹85,640
- Medium firms
- ₹68,512
- Small firms
- ₹42,820
- Micro firms
- ₹17,128
Unit rate: ₹0.14 per piece
- Other BIS charges
- ₹9,000 for every ISI mark product: application charge ₹1,000 · licence fee ₹1,000 · audit charges ₹7,000
- Foreign manufacturers
- Get a detailed quote
- Our consulting fee
- Best-value quote – let’s talk
All prices are a guide only and do not include GST. Rules and dates can change, so check the latest notice before you apply. Ask us for an up-to-date quote.
Common questions
Is BIS certification mandatory for Polyethylene containers for the transport of materials?
No. There is no Quality Control Order for it today, so the ISI mark is optional. It can still help you win tenders and gain the trust of buyers.
What is the BIS marking fee for Polyethylene containers for the transport of materials?
The minimum fee each year is ₹85,640 for large firms, ₹68,512 for medium firms, ₹42,820 for small firms and ₹17,128 for micro firms. Your firm size comes from your Udyam registration. BIS also works out a fee at ₹0.14 per piece. You pay the higher amount. GST is extra. These figures are a guide, based on the BIS fee list.
How much does testing for IS 6312 cost?
The price depends on the lab, the number of models and the tests needed. Send us your product details and we will get quotes from BIS-approved labs.
What is the HSN code for Polyethylene containers for the transport of materials?
It usually comes under HSN 39232990. Check the code on your bill of entry, because customs decides the code for the exact product.
Can a foreign manufacturer get the ISI mark?
Yes. Factories outside India apply under the Foreign Manufacturers Certification Scheme (FMCS). They must also name a representative in India, called an Authorised Indian Representative (AIR). The licence is in the name of the factory. Once the product is mandatory, importers cannot clear the goods at customs without it.
How long does BIS certification take?
Factories in India usually get a licence 30 to 60 days after a good test report. Factories outside India (FMCS) should plan for four to six months, including the factory visit.
Related products
- ISI Mark for Blow Moulded Polyolefin Containers – Closed Head Containers Over 60 Litres, up to – IS 7408 (Part 3)Voluntary
- ISI Mark for Cellulose Film – IS 5012Voluntary
- ISI Mark for Chlorinated polyvinyl chloride (CPVC) pipes for potabvle hot and cold water distribution – IS 15778Voluntary
- ISI Mark for Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution – IS 17546Voluntary
- ISI Mark for Cladding Films for Greenhouse / Polyhouse – IS 15827Voluntary
- ISI Mark for Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets – IS 2046Voluntary
- ISI Mark for Dunnage pallets - Ware housing – IS 13714Voluntary
- ISI Mark for Epoxy Resin, Hardners and Epoxy Resin Compositions for Floor Topping – IS 9197Voluntary
Not sure which certification you need?
Send us the product name and the countries you sell in. A specialist replies with the standards that apply, the documents to prepare, the lab cost and the timeline. The assessment is free.
- The list of approvals comes to you in writing
- Get Started with the Right Expert
- Testing, certification and registrations handled by one team
Thank you — we've got it.
A certification specialist will contact you within 1 business day, usually much sooner.
Need it faster? WhatsApp us