Pesticide Formulation Testing

Confirm that your insecticide, fungicide or herbicide contains the declared active ingredient and meets its specification before an inspector samples it.

4.9/5Rated by 28 clients

How Pesticide Formulation Testing works

1Assessment of requirement
2Sample collection
3Right lab assigned
4Testing
5Test report

Each step explained

Trusted by Leading Brands Across the Globe

Overview of Pesticide Formulation Testing

Tested by: NABL-accredited partner lab
Regulation: Insecticides Act 1968
Typical turnaround: 5–7 working days
Sample needed: 250 g or 250 ml

Pesticides are regulated under the Insecticides Act, 1968. Each product is registered with the Central Insecticides Board and Registration Committee (CIB&RC) for a specified active ingredient content and formulation type, and insecticide inspectors sample stock from manufacturers and dealers. A sample that fails can be declared misbranded, leading to stop-sale orders and prosecution.

Manufacturers, formulators and importers test each batch for active ingredient content and the physical properties that make the formulation work in the field: suspensibility, wettability, emulsion stability, pH and storage stability. Technical-grade material is checked for purity and impurities. Residues of pesticides in crops are a separate test; see pesticide residue testing.

What we do for you

Lab and parameter list chosen for your purpose: licence, export, buyer or internal QC
Sampling guidance, and pickup or on-site sampling where needed
One contact who follows up with the lab until the report is issued
Report explained in plain language, with next steps if a result fails

What to send

The lab confirms the exact quantity and packing for your product when we book the test.

Sample

Quantity: 250 g or 250 ml
Sealed and labelled with the product name, batch number and date
Packed so that it cannot leak or be contaminated in transit

Details to share

Product name, grade and specification sheet
Safety data sheet (SDS)
The standard or buyer specification to test against
Purpose: quality check, dispute, export or regulatory filing

How we handle Pesticide Formulation Testing

1
Assessment of requirement
We confirm the standard, the list of tests and how many samples your product needs.
2
Sample collection
We collect the samples from your factory or warehouse, or tell you exactly where to send them.
3
Right lab assigned
We choose an accredited lab (NABL, BIS-recognised or ILAC) that covers your standard and can start soonest.
4
Testing
The lab tests your samples against the standard. We follow up and tell you at once if a test fails.
5
Test report
You receive the signed test report, ready to use for BIS, WPC, CE or your buyer.

What the lab tests

Parameter	Why it is checked
Active ingredient content	Against the registered specification
Impurities in technical material	Purity and relevant impurities
Suspensibility and wettability	Wettable powders and suspension concentrates
Emulsion stability	Emulsifiable concentrates
Accelerated storage stability	Active content after heat storage
pH, moisture, particle size	Physico-chemical specification

The final list depends on your product, its standard and the purpose of testing. We confirm it with you before the sample goes to the lab.

Frequently asked questions

Can you test a competitor or spurious product?

Yes. Active ingredient analysis shows whether a product contains what its label claims, which is useful when spurious or under-strength products are suspected in the market.

Which standard is the product tested against?

The Indian Standard, international method or buyer specification that fits your purpose. We confirm it with you before the sample goes to the lab, and the report states the method used for each parameter.

Who carries out the testing?

Instacertify’s partner laboratories, accredited by NABL to ISO/IEC 17025 for the parameters on your report. We choose the lab, arrange the sample, follow up until the report is issued and explain the results to you.

What our clients say

“Instacertify helped us get BIS CRS certification for our entire product range within just 6 weeks. Their team handled everything from documentation to lab coordination. Highly professional service.”

Akash GuptaBIS CRS · Electronics brand

“They handled complete certification for us, from ISO 9001 to BIS for PVC cables and plugs. Thorough, professional and always available — they knew what needed to be done and when.”

Shivank VishnoiISO 9001 & BIS · Cables

“Getting TEC approvals for our access-control products seemed confusing and complex, but Instacertify made it simple.”

Jiten ShahTEC approval · Access control

Not sure which certification you need?

Send us the product name and the countries you sell in. A specialist replies with the standards that apply, the documents to prepare, the lab cost and the timeline. The assessment is free.

The list of approvals comes to you in writing
Get Started with the Right Expert
Testing, certification and registrations handled by one team

+91 99991 18039 WhatsApp us

Get a free assessment