Soil Testing

Test soil for crop nutrition and fertiliser planning, or for contamination before land is bought, built on or handed back.

4.9/5Rated by 28 clients

How Soil Testing works

1Assessment of requirement
2Sample collection
3Right lab assigned
4Testing
5Test report

Each step explained

Trusted by Leading Brands Across the Globe

Overview of Soil Testing

Tested by: NABL-accredited partner lab
Regulation: Soil Health Card norms & EP Act
Typical turnaround: 5–7 working days
Sample needed: 500 g–1 kg per composite

For agriculture, the Soil Health Card scheme tests 12 parameters: pH, electrical conductivity, organic carbon, nitrogen, phosphorus, potassium, sulphur, zinc, iron, copper, manganese and boron. Farms, plantations, FPOs and agri-input companies use these results to plan balanced fertiliser doses, and for organic and good agricultural practice certification.

For industrial and project land, soil is tested for heavy metals, pesticides, petroleum hydrocarbons and other contaminants, as part of environmental baseline studies, due diligence before buying or leasing land, and decommissioning. Engineering soil properties for foundations are a separate geotechnical investigation.

What we do for you

Lab and parameter list chosen for your purpose: licence, export, buyer or internal QC
Sampling guidance, and pickup or on-site sampling where needed
One contact who follows up with the lab until the report is issued
Report explained in plain language, with next steps if a result fails

What to send

The lab confirms the exact quantity and packing for your product when we book the test.

Sample

Quantity: 500 g–1 kg per composite
Sealed and labelled with the product name, batch number and date
Packed so that it cannot leak or be contaminated in transit

Details to share

Consent to operate or environmental clearance conditions, if you have them
A short description of the process and the sources to be checked
Purpose: SPCB return, consent renewal, audit, buyer or complaint
Previous test reports, if any

How we handle Soil Testing

1
Assessment of requirement
We confirm the standard, the list of tests and how many samples your product needs.
2
Sample collection
We collect the samples from your factory or warehouse, or tell you exactly where to send them.
3
Right lab assigned
We choose an accredited lab (NABL, BIS-recognised or ILAC) that covers your standard and can start soonest.
4
Testing
The lab tests your samples against the standard. We follow up and tell you at once if a test fails.
5
Test report
You receive the signed test report, ready to use for BIS, WPC, CE or your buyer.

What the lab tests

Parameter	Why it is checked
pH, EC and organic carbon	Soil reaction, salinity and organic matter
Nitrogen, phosphorus, potassium	Major nutrients
Sulphur and micronutrients	Zinc, iron, copper, manganese, boron
Texture and water-holding capacity	Irrigation and crop planning
Heavy metals	Contamination of industrial and project land
Pesticides and petroleum hydrocarbons	Contaminated-site assessment

The final list depends on your product, its standard and the purpose of testing. We confirm it with you before the sample goes to the lab.

Frequently asked questions

How should a soil sample be collected?

Take small samples from 10–15 spots across the field at plough depth, avoiding bunds, trees and fertiliser heaps, mix them, and send about 500 g. For contamination studies, sampling follows a grid and depth plan we agree in advance.

Will the Pollution Control Board accept the report?

Monitoring is done by labs accredited by NABL and recognised under the Environment (Protection) Act, which State Pollution Control Boards accept for consent compliance and returns. Some boards keep their own list of approved labs; we check yours before booking.

Who carries out the testing?

Instacertify’s partner laboratories, accredited by NABL to ISO/IEC 17025 for the parameters on your report. We choose the lab, arrange the sample, follow up until the report is issued and explain the results to you.

What our clients say

“Instacertify helped us get BIS CRS certification for our entire product range within just 6 weeks. Their team handled everything from documentation to lab coordination. Highly professional service.”

Akash GuptaBIS CRS · Electronics brand

“They handled complete certification for us, from ISO 9001 to BIS for PVC cables and plugs. Thorough, professional and always available — they knew what needed to be done and when.”

Shivank VishnoiISO 9001 & BIS · Cables

“Getting TEC approvals for our access-control products seemed confusing and complex, but Instacertify made it simple.”

Jiten ShahTEC approval · Access control

Not sure which certification you need?

Send us the product name and the countries you sell in. A specialist replies with the standards that apply, the documents to prepare, the lab cost and the timeline. The assessment is free.

The list of approvals comes to you in writing
Get Started with the Right Expert
Testing, certification and registrations handled by one team

+91 99991 18039 WhatsApp us

Get a free assessment