Electronics & Electrical
BIS Extends Implementation Date for Revised IS 10322 LED Luminaire Standards to February 2027
New Delhi, August 2026: The Bureau of Indian Standards (BIS) has announced an important update for manufacturers, importers and businesses dealing with LED luminaires in India.
BIS has extended the concurrent running period for revised standards under the IS 10322 Series until 2 February 2027. The extension gives businesses additional time to transition from the existing standards to the revised 2026 editions.
The latest circular was issued by the BIS Registration Department on 31 July 2026, with reference to the earlier implementation guidelines issued on 20 March 2026.
What Has BIS Changed?
Under the latest circular, BIS has extended the last date for concurrent running of the current and revised standards for seven categories of LED luminaires.
This means manufacturers and other stakeholders can continue working with the existing applicable standards during the extended transition period while preparing for compliance with the revised 2026 standards.
The new last date of concurrent running for all seven listed categories is:
2 February 2027
Which LED Luminaire Standards Are Covered?
The extension applies to the following standards under the IS 10322 Series:
| Product Category | Existing Standard | Revised Standard |
|---|
| Fixed General Purpose LED Luminaires | IS 10322 (Part 5/Sec 1):2012 | IS 10322 (Part 5/Sec 1):2026 |
| Recessed LED Luminaires | IS 10322 (Part 5/Sec 2):2012 | IS 10322 (Part 5/Sec 2):2026 |
| LED Luminaires for Road & Street Lighting | IS 10322 (Part 5/Sec 3):2012 | IS 10322 (Part 5/Sec 3):2026 |
| LED Flood Lights | IS 10322 (Part 5/Sec 5):2013 | IS 10322 (Part 5/Sec 5):2026 |
| LED Hand Lamps | IS 10322 (Part 5/Sec 6):2013 | IS 10322 (Part 5/Sec 6):2026 |
| LED Lighting Chains | IS 10322 (Part 5/Sec 7):2017 | IS 10322 (Part 5/Sec 7):2026 |
| LED Luminaires for Emergency Lighting | IS 10322 (Part 5/Sec 8):2013 | IS 10322 (Part 5/Sec 8):2026 |
BIS has specified 2 February 2027 as the extended last date of concurrent running for each of these categories.
What Does the Extension Mean for Manufacturers?
For manufacturers, this extension provides some much-needed breathing room.
Businesses now have additional time to review their existing products, testing reports, technical documentation and BIS registration status against the requirements of the revised 2026 standards.
Instead of having to complete the transition immediately, manufacturers can use the extended period to plan testing and compliance activities more efficiently.
However, the extension should not be viewed as a reason to delay preparation.
The revised standards will eventually become the applicable requirements, so manufacturers should begin the transition process well before the new deadline.
Why Is This Update Important?
The IS 10322 Series is important for the safety and performance of various types of luminaires used in residential, commercial, industrial, outdoor and emergency lighting applications.
The revised standards update the technical requirements applicable to different LED luminaire categories. For businesses already operating under BIS requirements, moving to the revised standards may involve reviewing product designs, components, test reports and other compliance documentation.
The latest BIS extension therefore gives manufacturers more time to manage this transition without unnecessary disruption to their ongoing compliance activities.
What Should Manufacturers and Importers Do Now?
Although BIS has extended the transition period, businesses should not wait until February 2027 to start preparing.
Manufacturers and importers dealing with affected LED luminaire products should consider the following steps:
1. Identify the applicable IS 10322 standard
First, determine which IS 10322 Part and Section applies to your product. The applicable requirement depends on the type and intended use of the luminaire.
2. Review existing BIS compliance
Check your current BIS registration, product models, test reports and supporting documentation against the revised 2026 standard.
3. Evaluate product changes
Determine whether your existing product design, components, construction or technical specifications require modification to meet the revised requirements.
4. Plan revised testing
Where required, arrange testing according to the applicable revised standard through an appropriate laboratory.
5. Update technical documentation
Keep technical documents, test reports, product details and other supporting information ready for the transition to the revised requirements.
6. Complete the transition before the deadline
The extended date should be treated as an opportunity to complete the transition early rather than waiting until the final weeks.
Does the Extension Cancel the Revised Standards?
No.
The BIS circular does not cancel or withdraw the revised 2026 standards. Instead, it extends the period during which the existing and revised standards can run concurrently for the specified LED luminaire categories.
BIS has specifically stated that the other terms and conditions of its earlier circular remain unchanged.
Therefore, businesses should continue preparing for compliance with the revised standards while taking advantage of the additional transition time.
What About BIS CRS Registration?
LED luminaires covered under the applicable BIS Compulsory Registration Scheme requirements need to remain compliant with the relevant BIS requirements.
Manufacturers should therefore review their existing registration and determine whether their products, models and test documentation require any action because of the transition to the revised IS 10322 standards.
The extension provides additional time, but it does not eliminate the need for proper BIS compliance.
A Practical Opportunity for Businesses
For the LED lighting industry, the latest extension is more than just a deadline change.
It gives manufacturers an opportunity to take a structured approach to compliance. Businesses can review their product portfolios, identify affected models, arrange testing and prepare the required documentation without rushing the process.
Starting early can also help manufacturers avoid last-minute testing delays or documentation issues as the revised implementation date approaches.
Final Takeaway The BIS extension dated 31 July 2026 gives manufacturers and importers of specified LED luminaires additional time to transition to the revised IS 10322:2026 standards. The concurrent running period for seven specified LED luminaire categories has now been extended until 2 February 2027. For businesses, the message is simple: the deadline has moved, but preparation should not stop. Manufacturers should use this additional time to review their products, complete the required testing and documentation, and prepare for a smooth transition to the revised BIS requirements well before February 2027. Official BIS Update The extension was published by the Bureau of Indian Standards (BIS) through its CRS portal on 31 July 2026. For the original circular, refer to the official BIS notification: “Extension in date of implementation of Revised Standards for LED Luminaires.”
