Ambient Air Quality Monitoring

Measure the air quality around your plant, site or project against India’s National Ambient Air Quality Standards.

How Ambient Air Quality Monitoring works

1Assessment of requirement
2Sample collection
3Right lab assigned
4Testing
5Test report

Trusted by Leading Brands Across the Globe

Overview of Ambient Air Quality Monitoring

Tested by: NABL-accredited partner lab
Regulation: NAAQS 2009
Typical turnaround: 7–10 days after sampling
Sampling: 24-hour sampling on site

The National Ambient Air Quality Standards, 2009 set limits for 12 pollutants: PM10, PM2.5, sulphur dioxide, nitrogen dioxide, carbon monoxide, ozone, ammonia, lead, benzene, benzo(a)pyrene, arsenic and nickel. Separate limits apply to industrial, residential and rural areas and to ecologically sensitive areas.

Ambient monitoring is a routine condition of SPCB consents, a core part of environmental impact assessment baseline studies and environmental clearance compliance reports, and increasingly part of ESG reporting. Monitoring stations are set up at the boundary and at nearby receptors, usually running for 24 hours at a time.

What we do for you

Lab and parameter list chosen for your purpose: licence, export, buyer or internal QC
Sampling guidance, and pickup or on-site sampling where needed
One contact who follows up with the lab until the report is issued
Report explained in plain language, with next steps if a result fails

What to send

We plan the visit with you, so that monitoring happens under normal operating conditions.

For the site visit

Site address, a contact person and any entry permissions
Safe access to the sampling or monitoring points
A power point near the monitoring location
Plant or equipment running at normal load

Details to share

Consent to operate or environmental clearance conditions, if you have them
A short description of the process and the sources to be checked
Purpose: SPCB return, consent renewal, audit, buyer or complaint
Previous test reports, if any

How we handle Ambient Air Quality Monitoring

1
Assessment of requirement
We confirm the standard, the list of tests and how many samples your product needs.
2
Sample collection
We collect the samples from your factory or warehouse, or tell you exactly where to send them.
3
Right lab assigned
We choose an accredited lab (NABL, BIS-recognised or ILAC) that covers your standard and can start soonest.
4
Testing
The lab tests your samples against the standard. We follow up and tell you at once if a test fails.
5
Test report
You receive the signed test report, ready to use for BIS, WPC, CE or your buyer.

What the lab tests

Parameter	Why it is checked
PM10 and PM2.5	Respirable dust, the most common exceedance in India
SO2 and NO2	From fuel burning and traffic
Carbon monoxide and ozone	Combustion and secondary pollutants
Ammonia	Fertiliser, chemical and livestock sources
Lead, arsenic and nickel	Metals in particulate matter
Benzene and benzo(a)pyrene	Organic pollutants

The final list depends on your product, its standard and the purpose of testing. We confirm it with you before the sample goes to the lab.

Frequently asked questions

How many monitoring locations are needed?

It depends on your consent conditions or the EIA terms of reference. Typically there are stations upwind and downwind of the site plus nearby settlements. We plan locations with you before mobilising.

Will the Pollution Control Board accept the report?

Monitoring is done by labs accredited by NABL and recognised under the Environment (Protection) Act, which State Pollution Control Boards accept for consent compliance and returns. Some boards keep their own list of approved labs; we check yours before booking.

Who carries out the testing?

Instacertify’s partner laboratories, accredited by NABL to ISO/IEC 17025 for the parameters on your report. We choose the lab, arrange the sample, follow up until the report is issued and explain the results to you.

What our clients say

“Instacertify helped us get BIS CRS certification for our entire product range within just 6 weeks. Their team handled everything from documentation to lab coordination. Highly professional service.”

Akash GuptaBIS CRS · Electronics brand

“They handled complete certification for us, from ISO 9001 to BIS for PVC cables and plugs. Thorough, professional and always available — they knew what needed to be done and when.”

Shivank VishnoiISO 9001 & BIS · Cables

“Getting TEC approvals for our access-control products seemed confusing and complex, but Instacertify made it simple.”

Jiten ShahTEC approval · Access control

Not sure which certification you need?

Send us the product name and the countries you sell in. A specialist replies with the standards that apply, the documents to prepare, the lab cost and the timeline. The assessment is free.

The list of approvals comes to you in writing
Get Started with the Right Expert
Testing, certification and registrations handled by one team

+91 99991 18039 WhatsApp us

Get a free assessment